New

<h3>Autel BT608 Replacement Battery Clamp Cable</h3>
<p>This replacement battery clamp cable is designed for the Autel MaxiBAS BT608. The locking tool connector and clearly identified red positive and black negative clamps provide the physical connection required for supported in-vehicle and out-of-vehicle battery tests.</p>
<h3>Technical Specifications</h3>
<table><thead><tr><th>Specification</th><th>Details</th></tr></thead><tbody>
<tr><td><strong>Product Type</strong></td><td>Replacement battery test clamp cable</td></tr>
<tr><td><strong>Compatibility</strong></td><td>Autel MaxiBAS BT608</td></tr>
<tr><td><strong>Positive Lead</strong></td><td>Red clamp</td></tr>
<tr><td><strong>Negative Lead</strong></td><td>Black clamp</td></tr>
<tr><td><strong>Tool Connector</strong></td><td>Locking threaded BT608 clamp-cable connector</td></tr>
<tr><td><strong>Use</strong></td><td>Supported battery, starter and charging-system tests</td></tr>
</tbody></table>
<p><strong>Compatibility note:</strong> Specified for the Autel MaxiBAS BT608. Connector style and electrical design differ across battery testers, so do not assume compatibility with BT506, BT508, BT609 or third-party analyzers unless separately confirmed.</p> <h3>Autel BT608 Replacement Battery Clamp Cable</h3>
<p>This replacement battery clamp cable is designed for the Autel MaxiBAS BT608. The locking tool connector and clearly identified red positive and black negative clamps provide the physical connection required for supported in-vehicle and out-of-vehicle battery tests.</p>
<h3>Technical Specifications</h3>
<table><thead><tr><th>Specification</th><th>Details</th></tr></thead><tbody>
<tr><td><strong>Product Type</strong></td><td>Replacement battery test clamp cable</td></tr>
<tr><td><strong>Compatibility</strong></td><td>Autel MaxiBAS BT608</td></tr>
<tr><td><strong>Positive Lead</strong></td><td>Red clamp</td></tr>
<tr><td><strong>Negative Lead</strong></td><td>Black clamp</td></tr>
<tr><td><strong>Tool Connector</strong></td><td>Locking threaded BT608 clamp-cable connector</td></tr>
<tr><td><strong>Use</strong></td><td>Supported battery, starter and charging-system tests</td></tr>
</tbody></table>
<p><strong>Compatibility note:</strong> Specified for the Autel MaxiBAS BT608. Connector style and electrical design differ across battery testers, so do not assume compatibility with BT506, BT508, BT609 or third-party analyzers unless separately confirmed.</p>

Autel BT608 Replacement Battery Clamp Cable | Positive & Negative Battery Test Leads

Name: Autel BT608 Replacement Battery Clamp Cable | Positive & Negative Battery Test Leads | Automax Tools
SKU: BT608-CLAMP-CABLE

Categories: Accessories Consumables, Autel, Battery Chargers & Booster, Battery Testers, Car Jump Starter, CHARGERS , BOOSTER, Diagnostic Tools Parts SKU: BT608-CLAMP-CABLE Tags: Autel, Battery Clamps, battery tester, BT608, Replacement Cable

Rated 0 out of 5

0 reviews

Autel BT608 Replacement Battery Clamp Cable

This replacement battery clamp cable is designed for the Autel MaxiBAS BT608. The locking tool connector and clearly identified red positive and black negative clamps provide the physical connection required for supported in-vehicle and out-of-vehicle battery tests.

Technical Specifications

Specification	Details
Product Type	Replacement battery test clamp cable
Compatibility	Autel MaxiBAS BT608
Positive Lead	Red clamp
Negative Lead	Black clamp
Tool Connector	Locking threaded BT608 clamp-cable connector
Use	Supported battery, starter and charging-system tests

Compatibility note: Specified for the Autel MaxiBAS BT608. Connector style and electrical design differ across battery testers, so do not assume compatibility with BT506, BT508, BT609 or third-party analyzers unless separately confirmed.

Order on WhatsApp

Autel BT608 Battery Clamp Cable – Replacement Test Connection for Accurate Battery Analysis

Key Benefits

Direct replacement connection for the BT608 battery-test port.
Red and black insulated clamps support correct polarity identification.
Secure threaded connector helps prevent accidental disconnection during testing.
Suitable for restoring reliable test contact when an original cable is worn or damaged.

Professional Application

Connect and tighten the clamp-cable connector at the BT608, attach the red clamp to battery positive (+) and the black clamp to battery negative (−), then follow the analyzer’s on-screen test instructions.

Recommended Workflow

Inspect the battery, terminals, cable insulation and clamp jaws before testing.
Connect the cable to the BT608 and tighten the connector.
Attach red to positive and black to negative with full metal contact.
Run the selected test, remove the clamps safely and clean the jaws after use.

Compatibility and Ordering Guidance

Specified for the Autel MaxiBAS BT608. Connector style and electrical design differ across battery testers, so do not assume compatibility with BT506, BT508, BT609 or third-party analyzers unless separately confirmed.

Package Contents

1 × replacement clamp cable with red positive and black negative clamps

Shipping Information

Approximate packed shipping weight: 0.55 kg. Approximate packed dimensions: 28 × 22 × 8 cm (L × W × H). Packaging may vary slightly by production batch.

For model, vehicle and software compatibility confirmation before purchase, contact Automax Tools with the vehicle VIN and the exact Autel tablet or programmer model.