(0 reviews)

BENZ eCOM DoIP For Mercedes eCOM DoIP Diagnostics & Programming,Benz eCOM DoIP Multiplexer Replace Xentry Diagnosis VCI Work With Xentry, Vediamo & DTS Monaco Support DoIP for latest E and S series, MB eCOM DoIP diagnostic C5 Xentry Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5.

  • Newest vehicles Only (after 2009 – w204 and up) Serial 200xxx
  • Special for DoIP programming on the latest E and S series
  • Wireless Communication Supported
  • Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5
  • Package Contents: ECOM Box Hardware , USB-to-LAN Adapter,
    DSUB9 Adapter cable for standard CAN connection,
    ECOM OBD2 cable
Order on WhatsApp


Mercedes ECOM is the diagnostic and swipe communication interface used by daimler-benz’s production and r&d department. It supports the after sales diagnostic software Xentry, Vediamo, and the Monaco DTS, the exclusive development software, with higher access rights than SDconnect (C4).

Xentry and DAS Developer mode, commonly known as: exploit data engineering version after 2010, has added many restrictions on functions. Therefore, people may encounter that the vehicle version is too new to enter the control unit, or they cannot make any special modifications after entering the control unit. For example, the w204/212 2012 meter may need to be configured in the regional language, or turn on other convenience functions.

The database of diagnosis /coding/retrofit/flashing for the Mercedes engineer version USES the Xentry database, so the Mercedes engineer version is dependent on the Xentry version. As long as the database is new, the Mercedes engineer version can use the V4.00 version on the new model, and compact3 & SDconnect does not support the ODX document. The latest V5.00 supports ODX files with eCom. It is recommended to use eCom with DoIP function, which is faster and more stable.

  • Supports DoIP protocol
  • ECOM Box Hardware Serial number starts with 2xxxxx
  • Works with Xentry, DAS software and Engineering programs Vediamo and DTS Monaco
  • Support DOIP, work on latest Mercedes to year 2020
  • Support Vediamo and DTS Engineering with 256GB SSD Software in package with free activation (If you already have eCOM software, you can choose hardware only)
  • Support XENTRY
  • Warranty: One Year


1. Perfect DoIP/CAN communication.
2. Quick Test: Quick test of the whole vehicle ECU, you can choose to edit more functions at the same time.
3. Variant Coding: With variant code to add VO-delete VO function.
4. Identification: One-click to read all module programming numbers of the entire car and save.
5. Complete Variant Coding: Read all ECUcoding data of the vehicle at one time, can be written to the vehicle again, completely offline operation.
6. Diagnostic Services: Advanced Features view internal and external data for the module you selected, turn on computer authorization (not driving authorization), activate the ECU, reset the ECU, and modify the original chassis number.
7. Flashprogramming: Achieve complete offline programming.
8. Diagnostic Trouble Code: Diagnostic module DTC .
9. ECU Exchange: Two identical ECUs exchange .
10. Automatic performance: Automatically activate dts Monaco 8.14 software when connected to the device.

Car Applications

Newest vehicles Only (after 2009 – w204 and up) Serial 200xxx

Special for DoIP programming on the latest E and S series.

Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5 flashing/programming

Technical Data

  • ECOM DoIP PC Interface: Ethernet / USB (with special cable)
  • Microprocessor: 32Bit MPC5200 @396MHz
  • Memory: 64MB RAM, 40 MB Flash
  • Voltage supply: 12/24 VDC
  • Operating Temperature: 0..45°C
  • Storage temperature: -20°C..70°C
  • Vehicle interface: galvanically decoupled
  • CAN1 (high speed)
  • CAN2 (high/low speed)
  • K-Line
  • LIN
  • Ethernet DoIP
  • KL15

0.0 Average Rating Rated (0 Reviews)


Be the first to review “BENZ eCOM DoIP”

Your email address will not be published. Required fields are marked *

You have to login to add images.