Autel MaxiScope MP408 4-Channel Automotive Oscilloscope | 20MHz | 80MS/s | USB | CAN LIN FlexRay | PC & MaxiSys
AED 1,412.50
The Autel MaxiScope MP408 is a professional 4-channel automotive oscilloscope for electrical and electronic troubleshooting. It connects by USB to a Windows PC or supported Autel MaxiSys tablet and converts the host device into a high-resolution waveform-analysis platform for sensors, actuators, ignition, charging systems and vehicle networks.
The MP408 provides 20MHz bandwidth, 12-bit vertical resolution and up to 80MS/s sampling with one or two channels active. Four color-coded BNC channels allow simultaneous signal comparison, while one-click auto setup simplifies voltage scale and time-base configuration.
It supports analysis of LIN, CAN and FlexRay signals, saves waveform data for later review and is powered directly from the USB connection, making it portable for workshop and mobile diagnostic use.
| Specification | MaxiScope MP408 |
|---|---|
| Product Type | 4-Channel Automotive Oscilloscope |
| Model | MaxiScope MP408 |
| Channels | 4 |
| Bandwidth | 20MHz |
| Vertical Resolution | 12-Bit |
| Maximum Sampling Rate | Up to 80MS/s with 1–2 Channels; 20MS/s with 3–4 Channels |
| Sensitivity | 10mV/div to 20V/div |
| Input Ranges | ±50mV to ±100V |
| Buffer Memory | 32M Samples Shared |
| Waveform Buffer | Up to 1000 Waveforms |
| PC Interface | USB 2.0 |
| Power | Powered Through USB |
| Vehicle Network Analysis | CAN, LIN & FlexRay |
| Compatibility | Windows PC & Supported MaxiSys Tablets |
| Software Updates | 2 Years Included – Automax Tools IMEA Package |
| Warranty | 1 Year Limited Warranty |
Autel MaxiScope MP408 Official / Compatibility Information
View Autel MaxiScope MP408 Information
1 Year Warranty. 2 Year Free Software Updates.
IP Restriction (works only in India, Middle East and Africa).
Out of stock
Autel MaxiScope MP408 – 4-Channel Automotive Oscilloscope
The Autel MaxiScope MP408 is a USB-powered professional automotive oscilloscope designed to help technicians diagnose electrical and electronic faults that cannot be confirmed with scan data alone.
It works with a Windows PC or supported MaxiSys tablet and displays high-resolution waveforms from sensors, actuators, ignition systems and vehicle communication networks.
4-Channel Simultaneous Waveform Analysis
Four color-coded input channels allow multiple signals to be measured and compared at the same time.
- Compare camshaft and crankshaft signals
- Analyze injector and ignition waveforms
- Measure sensor and actuator operation
- Compare network voltages
- Capture intermittent electrical faults
20MHz Bandwidth & Up to 80MS/s Sampling
The MP408 combines 20MHz bandwidth with 12-bit vertical resolution and high sampling speed for detailed automotive waveform capture.
Maximum single-shot sampling reaches up to 80MS/s with one or two channels active and up to 20MS/s when using three or four channels.
CAN, LIN & FlexRay Network Testing
The oscilloscope can be used to inspect physical-layer network signals on supported CAN, LIN and FlexRay systems, helping diagnose wiring, termination, voltage and waveform-integrity problems.
One-Click Auto Setup
Autel’s one-click auto setup automatically configures voltage scale and time base to quickly display a usable waveform, while advanced users can manually adjust trigger points and measurement settings.
USB Powered & Portable
The MP408 draws operating power from the connected USB port, so no separate oscilloscope power adapter is required during normal testing.
- h
- t
- t
- p
- s
- :
- /
- /
- a
- u
- t
- o
- m
- a
- x
- t
- o
- o
- l
- s
- .
- m
- e
- /
- w
- p
- –
- c
- o
- n
- t
- e
- n
- t
- /
- u
- p
- l
- o
- a
- d
- s
- /
- 2
- 0
- 2
- 0
- /
- 0
- 2
- /
- M
- a
- x
- i
- S
- c
- o
- p
- e
- –
- M
- P
- 4
- 0
- 8
- –
- 1
- .
- j
- p
- g
Supported Diagnostic Applications
Typical workshop applications include:
- Ignition diagnostics
- Injector and fuel-system signals
- Charging and starting systems
- Sensors and actuators
- CAN / LIN / FlexRay networks
- Parasitic and intermittent electrical faults
- Waveform capture and comparison
Warranty, Software Package & Regional Version
This Autel MaxiScope MP408 supplied by Automax Tools includes a 1-year limited warranty.
The Automax Tools IMEA package includes 2 years of software updates for the supported diagnostic/TPMS platform.
IMEA regional restriction: intended for operation in India, the Middle East and Africa.
Ideal for Professional Automotive Use
The Autel MaxiScope MP408 is well suited for:
- Automotive electricians
- Diagnostic specialists
- Advanced workshops
- Training centers
- Electrical troubleshooting technicians
Why Choose the Autel MaxiScope MP408?
The MP408 adds professional waveform measurement to supported Autel or PC-based diagnostic workflows and is especially useful when scan codes and live data are not enough to isolate an electrical fault.
Functions, compatibility and vehicle coverage can vary by vehicle, model year, host device, software version and region.
View Autel MaxiScope MP408 Information
Contact Automax Tools UAE for Autel MaxiScope MP408
| Weight | 1.9 kg |
|---|---|
| Dimensions | 31.2 × 24 × 8.8 cm |
Features
- Features one-click auto setup of voltage scale and time base
- Works on all makes and models of modern vehicles
- Compatible with LIN, CAN and FlexRay data bus standards
- Reads and displays electrical signals in high resolution waveforms
- Allows manual editing of measurement parameter display
- Saves and reviews waveform data
- Features color coded 4-channel control panel
- Intuitive UI design features easy trigger point adjustment and real time scale info display
- Direct power supply through USB connection
- Free online software update through the Internet
- Portable design with strong housing and protective rubber boot
Specifications
| Vertical resolution | 12 bits | |
| Channels | 4 | |
| Bandwidth | 20MHz | |
| Accuracy | 1% | |
| Sensitivity | 10mV/div to 20V/div | |
| PC Interface | USB 2.0 – Cable supplied | |
| Power Requirements | Powered from USB port | |
| Input Ranges (full scale) | ±v50mV to ±100V in 11 ranges | |
| Input Impedance | 1MΩ in parallel with 22pF | |
| Input Type | Single-ended, BNC connector | |
| Input Coupling | Software selectable AC/DC | |
| Overload Protection | ±200V on single input | |
| Buffer Memory | 32M samples shared among active channels | |
| Waveform Buffer | Up to 1000 waveforms | |
| Timebase Ranges | 100ns/div to 1000s/div | |
| Operating Temperature Range | 0°C to 50°C (15°C to 40°C for quoted accuracy) | |
| Storage Temperature Range | -20°C to +60°C | |
| Storage Humidity Range | 5% to 95%RH, Non-condensing | |
| Dimensions | 190X115X38mm | |
| Weight | < 0.5kg | |
| Maximum Sampling Rate (Single Shot) | ||
| 1 or 2 channels in use | 80MS/s | |
| 3 or 4 channels in use | 20MS/s |
Accessories
Downloads
| MaxiScope for Android V1.15 |  |
| MaxiScope for PC V2.10 | |
| MaxiScope App Installation Instructions (only for android) | |
| Android – MaxiScope MP408 User Manual V1.10.pdf | |
| PC – MaxiScope MP408 User Manual V1.10.pdf | |
5.0
100% Recommended (10 of 10)
Submit Your Review
more products
More Products-
Fuel Injector Tester AMT- 600 Pro
AED 2,260.00 -
Jaltest – Truck Select Brands 293158 MAZ
AED 2,305.20
Ibrahim N., Independent Mechanic, Ajman
Great value for the features. Not many scopes in this segment offer auto sweep, adjustable scale, and digital capture. Autel nailed it with the MP408.
Michael R., Specialist, Dubai
I used it on vintage VW wiring issues. The waveform graphs helped me pinpoint bad ground noise. Very useful in a multi-brand shop where signal issues come up often.
Yousef D., Fleet Engineer, Sharjah
Battery lasts well. I measured alternator ripple and voltage stability across several vehicles without needing to recharge. Very reliable tool to have.
Khaled M., ECU Tuning Specialist, Ras Al Khaimah
Pro-level scope in a compact form! I’ve tested vane sensors, injector signals, camshaft / crankshaft sensors — all clean waveforms. Great build quality and support from Automax Tools.
Stephan L., Diagnostic Consultant, UAE
The trigger and hold features are brilliant for capturing intermittent glitches. The user interface is intuitive and quick to navigate. Worth every dirham.
Hassan J., Performance Garage, Dubai
Excellent product from Autel. Combines with my IM608 to give full diagnostic + waveform analysis in one workflow. Very pleased by how much faster I can isolate signal issues now.
Fatima Hassan, Electrical Specialist, Abu Dhabi
Lightweight but powerful. The screen clarity is superb, even in bright sunlight. Great for diagnosing ignition coils, sensor signals, alternator waveforms — it’s become a go-to tool.
Omar Saleh, Mobile Auto Technician, Ajman
Very rugged and reliable. I’ve used the MP408 on multiple cars, generators, and marine engines. The probes are solid, and firmware updates keep it current.
Ravi Kumar, Workshop Technician, Sharjah
Fantastic handheld oscilloscope! I use it alongside my diagnostic scanner on Bosch engines. The live waveform capture helps catch transient faults other tools miss.
Ahmed Al Farsi, Auto Electrician, Dubai
The MaxiScope MP408 saved me hours diagnosing a wiring issue. The scope traces were sharp, the interface is straightforward, and the portability is ideal for fieldwork.